Installing skirting board can not only protect the wall, but also prevent stains from staining the wall when cleaning; if you are installing a wooden floor, you can also use the skirting to solve the expansion joints of the wooden floor, and some positions can also be used. Hide the wires to make the overall decoration more beautiful. There are three specific installation methods.
The wall-mounted type is a process in which the baseboard is directly attached to the outside of the putty paint finish surface. This kind of construction is less difficult. After sticking, the baseboard will protrude a piece, and the furniture cannot be leaned against the wall. At the time, there will be a very obvious dirty mark left on the baseboard and the ground, which is not very good-looking.
The flat wall type is to attach the baseboard to the wall of the wall with brick and cement, forming a vertical plane with the putty coating layer. Generally speaking, it is first to lay the ground, then fix the skirting, and finally, do the wall treatment, and this form can directly use the wall tiles as the skirting, no need to buy another, and it is more convenient to clean.
The in-wall type is the baseboard embedded in the bottom wall brick. Not only is the exterior façade flat, but also has the illusion of extending the ground and has the effect of enlarging a small space. Generally speaking, the in-wall baseboard, The height is about 1.5 to 3.5 cm, and the effect is also very beautiful.