We are a professional Skirting Board Manufacturers, steps of the skirting board installation

　　Step 1: Measure the length and prepare the material

　　In general, the length of the skirting board is fixed, so the length of the skirting board used in each section is different, so you need to first measure the length of the skirting board that needs to be used in each section.

　　Step 2: Cutting the skirting board

　　Before cutting, first use a tape measure, pencil, etc. to determine the required skirting board length, and then use sawtooth and other tools to cut.

　　Step 3: Install the skirting board

　　The skirting board is generally installed after the ground and wall construction is completed. Before installing the skirting board, the floor has been reserved for the floor. Before installing the skirting board, the small wooden block in the reserved position must be removed first, and then the skirting board of suitable length should be inserted into the reserved seam.

　　Step 4: Treatment of skirting board corners

　　Most of the skirting boards at the corners use cutting methods, and the edges of the corners are cut to a 45-degree angle and then fixed together. The effect of this treatment makes the skirting board still look natural and beautiful at the corners.

　　Step 5: Fix the skirting board

　　Although the skirting board is stuck in the seam, measures need to be taken to make it more secure. The tools needed to fix the skirting board are mainly floor nails and hammers. Install the skirting board, and then nail the floor nails into the skirting board, so that the skirting board and the wall are fixedly connected.

Our company not only has Kitchen Pvc Skirting Board, but also many other products. Welcome to visit our company!